9x9 & vinyl tile

Floor Tile Asbestos Testing

Old 9x9 tiles or black mastic? Find out whether they contain asbestos before you remove them, cover them or sand the floor for a refinish.

  • Licensed & Insured
  • Accredited Lab Analysis
  • Residential & Commercial

Which floors are suspect

Asbestos was used in flooring in several forms, and they are all common in Cleveland homes built before the mid 1980s:

  • 9x9 inch vinyl-asbestos tile, the classic kitchen and basement floor of the 1950s through 70s
  • 12x12 vinyl and asphalt tile from the 1970s and early 80s
  • Sheet vinyl and linoleum with a felt or paper backing
  • Black cutback adhesive, sometimes called black mastic, used to glue tile directly to concrete or subfloor
  • Older underlayment panels and the leveling compound beneath a newer floor

A floor in a 1950s Parma kitchen might have three generations stacked on it: the original 9x9 tile, a layer of plywood, then sheet vinyl from the 1980s. Each layer is a separate material and each one gets tested separately if it is going to be disturbed.

Why the mastic matters as much as the tile

Homeowners usually focus on the tile, because that is what they can see. In practice, the adhesive is often the bigger concern. Cutback mastic from that era regularly contains a higher percentage of asbestos than the tile, and it is the material that gets abraded when someone scrapes, sands or grinds the floor to prep it for a new surface.

That is why a lab report that covers only the tile is not useful. If the tile comes back positive and the mastic has never been tested, you still do not know what you are dealing with. We sample and report every distinct layer we find.

How the sampling works

We lift a small section of tile and, where present, a sample of the mastic and any underlayment, wetting the area first and sealing each sample in its own bag. Every sample is logged with the room and layer it came from. Where a floor has several different tile patterns, colors or installations, we sample each one, because installers routinely used leftover stock from different batches.

Results typically come back from the accredited laboratory in two to four business days. The report shows what each layer contains, so the guidance is specific: the tile may be non-friable while the mastic is not, or vice versa, and the two materials are handled differently.

What to do with the results

If the floor is in good condition and staying put, leaving it alone is often the safest and cheapest choice. Covering it with a new floor is common and acceptable, provided the contractor knows the material is there and does not grind or abrade it during prep. Encapsulation with a suitable coating is another option for concrete slabs.

If the floor has to come out, removal by a licensed abatement crew is the correct path. Tiles that are intact can sometimes be removed with the mastic in a controlled way, but the work still happens inside containment with HEPA equipment. We handle removal and clearance air testing as one job so there is no gap between the floor coming up and the space being cleared for reuse.

Mistakes that turn a small job into a big one

The damaging mistakes are almost always mechanical: grinding mastic off a concrete slab with a floor edger, sanding a wood floor with old adhesive residue, running a shop vacuum without a HEPA filter, or using an oscillating tool to chip tile up dry. Each of those spreads fibers through the house and, in some cases, through the furnace and ductwork.

If a floor has already been disturbed, stop work, keep people out of the room and call us for air testing before anyone cleans it up in a way that spreads the dust further.

Basements and rental properties

Basement rec rooms across Cleveland and Euclid are packed with 9x9 tile laid directly on the slab. Rental property owners call us when a tenant reports a lifting tile or a floor that is being replaced between tenants. Testing before the turnover work starts keeps the project on schedule and gives the owner a written record of what was in the unit.

Frequently Asked Questions

Next step

Schedule Your Asbestos Test Today

Tell us the property address and what you are planning. We will confirm a sampling time and explain exactly what gets tested.

Call (216) 208-4092Mon–Fri 8:00 AM – 6:00 PM · Sat by appointment